Logger boots are very helpful for many workers in the forest and logging industry as they provide the ultimate level of protection for their feet. They protect the worker’s feet from getting injured on the job, and they keep their feet warm in cold weather. They are also considered a necessary piece of equipment for many workers who work with heavy machinery. These logger boots are examples of such boots. These boots are typically very stiff and difficult to break in. They can be tough to break in, but with the right tips, it can be done. Please follow the following guide if you want to break them in fast.
Following steps can help break in logger boots fast
Initiate by wearing them around the house for a few days
Once you bring the logger boots home, start wearing them. Wear them on smooth surfaces like tiles or hardwood floors. Make sure to wear a good pair of thick socks with them, so they don’t rub against your feet too much and cause blisters. Remember, thick socks are a very important point in breaking in the boots. The more the socks are thick, the more it will help in speeding up the break-in process.
Use leather oil to soften your logger boots
There are a few ways to break in logger boots. The easiest way is to soften the leather with leather oil. You can buy leather oil at most hardware stores. Simply apply a small amount to your logger boots and let them sit for a few hours. The boot will become more pliable and easier to wear. It not only speeds up the break-in process but also makes the boots look good and increases their lifespan.
Use Boot Stretchers
Boot stretchers are a great way to break in boots. They stretch the boots by putting external pressure which helps to widen the boot from required spots and also soften them. It is one of the fastest ways to break in boots. However, there is only one drawback. It won’t confirm the boots according to your feet’s shape, so don’t use them too much. Only use it just to soften the boots.
You can easily get the boot stretcher from the market. It is a wooden or metal instrument. Put stretchers in the boots, stretch them a bit by rotating the lever, and leave them in the boots for 4 to 5 hours. After that, you will notice the boots are stretched and softer than before.
Use boot stretching spray
This method is an easy and convenient way to break in logger boots. Simply apply the boot stretching spray to the boots before putting them on and walking around. The boot stretching spray will help stretch the boots, so they are easier to put on and take off.
Heat the leather to soften it
You can speed up the break-in process by heating the boots with a hairdryer. This will help soften the leather and make them more pliable, making it easier for you to break them in. Though you are not using any chemicals in this process which is good, you are using heat, which also damages the boot. That’s why make sure to use the hairdryer from a distance of 6-7 inches at a medium setting. You just have to heat the boots from all sides; it will loosen up the leather. Once the boots are heated up, wear them and walk around your house for about an hour. Keep repeating the process until you fully break in the boots successfully.
Walk on rough terrains
Walking on hard and rough surfaces like rocky areas can help break in logger boots quickly. By putting pressure on the balls of your feet and using your heel to push off the ground, you will help wear down the boot’s traction surface.
How much time will the logger boots take to break in?
It can take anywhere from a couple of days to a few weeks for logger boots to break in. The amount of time will depend on the material used in the boots. Generally speaking, the tougher the material, the longer it will take for them to break in.