Regardless of whether you’re talking about a house or a car, the floor is the part that touches the ground. Floor covering or the process of installing gets referred to as “flooring” in this context. When you walk into a home, the floor is the first thing you see because it extends your home’s full width and length. This means there are many different types of quality flooring to choose from. The suitable material is critical as the surface subjected to wear and tear.
The Different Types of Flooring
Floors can come in a variety of forms and materials.
1. The mud floor is the first thing you notice.
There are several different types of earthen flooring, including dirt, raw earth, and other unworked ground materials commonly referred to as “adobe.” Nowadays, it’s usually made from a combination of finely chopped straw, sand, and clay. Increased soil tensile and shear strength and reduced shrinkage achieved.
Suitability
These floors get installed in commercial or professional buildings only in rural areas where the cheapest and easiest option chosen. Maintaining the mud floor is simple because it retains its temperature throughout the year, making it ideal for areas where temperatures fluctuate significantly throughout the year.
2. The floor made of brick.
Brick flooring is one of the types of floors with a brick-based topping. Construction and repair straightforward, but the rough surface absorbs and holds moisture, potentially leading to dampness in the building.
Suitability:
The floors are suitable for retail establishments such as supermarkets and convenience stores.
3. Ceramic tile floor: a good option
The term “tile floor” refers to a floor covered in tiles. The quality, color, shape, and thickness of the tiles used are entirely flexible.
How to build a tiled floor
The base course prepared in the same way that brick quality flooring is for constructing a tile floor.
To finish the base course, screed battens apply a thin layer of lime or cement mortar. Afterward, the screeds leveled and fixed to the proper height. The selected tiles used on a 6 mm thick mattress of wet cement mortar when the surface mortar has hardened sufficiently. (1:5). The joints sanded down to remove any excess mortar. After three days, a carborundum stone used to polish the joints’ surfaces, particularly the edges.
Suitability:
The courtyards of buildings paved with these floors. Glazed tile floors commonly used in high-end modern facilities.
4. The flagstone floor:
The term “flagstone floor” refers to floors covered with stone slabs. It is acceptable for the stone slabs used here to be of different sizes, but they should not exceed 75 cm in length, 35 cm in width, and 3.8 cm in thickness.
Flagstone flooring built in the following ways:
The method used to construct a tile floor can also create a flagstone floor. At least an hour before laying the slabs. Mortar should get applied evenly and firmly to ensure that they are secure. While laying, use a trowel to strike off any excess thickness of the joints.
Suitability:
These floors are ideal for use as a go-down, a motor shed, or a store’s pavement.
Floor made of cement and concrete:
Cement concrete floors, also known as conglomerate floors, have a cement concrete topping. Over a 10 cm thick base concrete and a 10 cm thick clean sand layer over the ground that has compacted and solidified, these floors constructed with a 2.5-5 cm wide concrete layer. These types of floors are becoming more and more popular.
