With aluminium as their main material, they provide a comprehensive range of aluminium fabrication services to meet your needs. They also offer machinery and other metal products to help you work more efficiently with metals and machinery.
Without taking proper precautions, you can do serious or even fatal damage to yourself or those around you if working with aluminium, steel, copper, brass, or any other type of metal! In this article, we’ll cover some safety precautions when working with these materials so that you don’t get hurt in the process.
Things To Remember:
Wear Goggles
You must wear proper eye protection when working with metals. When cutting, grinding, or welding metal, sparks and thin hot pieces of metal fly through the air, which can easily cause damage if they land in your eyes! You should also be wearing gloves to protect yourself from any sharp edges or burns caused by touching a heated metal object.
Wear Proper Mask
It’s also important to be aware of the fumes emitted when working with metals. Many types of metal, including aluminium, contain toxic chemicals which can cause health problems if inhaled. Make sure you wear a proper mask to avoid breathing these in and always work in a well-ventilated area.
Beware of Electric Shock
When working with metal, it’s important to be aware of the dangers of electric shock. Metal is a good conductor of electricity, so if you come into contact with a live wire while holding a piece of metal, you can be seriously injured or even killed. Ensure that all electrical equipment is properly insulated and double-check that it is switched off before working with metal.
Be Careful with Machinery
Working with machinery can be dangerous if you’re not careful. Ensure to read the instruction manual carefully before using any machinery and always wear the appropriate safety gear, such as gloves, goggles, and a hard hat. Never put your fingers or hands near moving parts, and be very careful when lifting heavy objects.
Know Your Limits
It’s important to know your limits when working with metal. Trying to do too much can lead to mistakes and accidents, so take it slow and steady until you’re confident in your abilities. Don’t be afraid to ask for help if you don’t know how to do something – there’s no shame in admitting that you need some assistance. Welding specialists in Griffith, NSW, like Topweld General Engineering, can help.
Keep Your Workplace Clean
A messy workplace is a dangerous workplace, especially when working with machinery. Make sure to keep your work area clean and free of clutter so that you can safely move around without tripping or getting injured.
With these safety precautions in mind, you can work with metal safely and efficiently. Remember to always take your time and be careful when working with any machinery.
